一、物化性能
主要成分 特殊的改性季銨鹽
外觀 黃色液體
含固量 80%
PH值 6-8
離子性 陽離子
二、使用方法
建議稀釋至5-10倍后使用
稀釋方法：加入水至60℃—攪拌加入 Thor —攪拌下保溫60℃,30min
—降溫至40℃以下過濾即可
.浸漬工藝
稀釋后用量：2-3%（owf）
浸漬（20-40min）—脫水—焙烘（120-170℃）
.浸軋工藝
稀釋后用量：20-40g/L
一浸一軋（或二浸二軋）（軋余率70%左右）—焙烘（120-170℃）具體工藝請用戶通過試樣的情況調整
貯 存
非危險品，常溫避光，密封保存貯存期6個月，125公斤/桶
溫馨提示：本網(wǎng)站所展示單價均為200g 小樣運費，各產品實際單價待確認要求后報價。
Antistatic Finishing Agent
HOLPOSON® Thor
Antistatic finishing agent Thor is suitable for the antistatic of synthetic and natural fiber; specially modified quaternary ammonium salt has stable performance, and can be used in the same bath with most types of silicone oil, which does not affect the fabric style. It has excellent moisture absorbency, electric conductivity and pollution/dust resistance.
Physical & chemical properties:
Appearance: Yellow liquid
Solid content: 80%
pH: 6-8
Ionicity: Cationic
Usage:
It is re*mended to use it after diluting it 5-10 times.
Dilution method: Add water at 60 ℃ - stir and add Thor - keep at 60 ℃ while stirring for 30min
- lower the temperature to below 40 ℃ and filter.
Impregnation method
Dosage after dilution: 2-3% (o.w.f.)
Impregnation (20-40min) - dehydration - baking (120-170 ℃)
Padding method
Dosage after dilution: 20-40g/L
Dip and roll once or dip and roll twice (Liquid rate: 70%) - baking (120-170 ℃) To be more specific, please adjust through the sample test.
Storage:
1. Non-hazardous substance. Please protect it from light at normal temperature
2. Storage time when sealed: 6 months
3. 125kg/barrel
ALICE