韓國工程POM Kepital FB2030 產品特性：玻璃珠增強，低翹曲，尺寸穩定，適用于需要低翹曲和凹痕的部件
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

POM FB2030 物性表：

Specific Gravity	1.63	g/cm³	ASTM D792
Density	1.64	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	18	g/10 min	ASTM D1238
Melt Mass-Flow Rate (MFR)	19	g/10 min	ISO 1133
Molding Shrinkage - Flow (2.00 mm)	1.5	%	ASTM D955
Molding Shrinkage - Flow	1.5	%
Water Absorption (Equilibrium, 23°C, 60% RH)	0.20	%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 23°C)	57.0	MPa	ASTM D638
Tensile Stress (Break, 23°C)	58.0	MPa	ISO 527-2
Tensile Elongation (Break, 23°C)	4.0	%	ASTM D638
Tensile Strain (Break, 23°C)	4.0	%	ISO 527-2
Flexural Modulus (23°C)	4040	MPa	ASTM D790
Flexural Modulus (23°C)	4050	MPa	ISO 178
Flexural Strength (23°C)	97.0	MPa	ISO 178
Flexural Strength (Yield, 23°C)	96.0	MPa	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	2.5	kJ/m²	ISO 179/1eA
Notched Izod Impact (3.20 mm)	37	J/m	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	138	°C	ASTM D648
Melting Temperature	165	°C	ASTM D3418
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+16	ohms	ASTM D257
Surface Resistivity	1.0E+16	ohms	IEC 60093
Volume Resistivity	1.0E+14	ohm·cm	ASTM D257
Volume Resistivity	1.0E+14	ohm·cm	IEC 60093
Electric Strength	20	kV/mm	IEC 60243-1