韓國工程POM Kepital FG2015 產品特性：含15%玻纖增強，中等粘度，適用于對剛性、耐疲勞性、耐蠕變性和耐熱性要求特別高的產品
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149
POM FG2015 物性表：
| Specific Gravity |
1.50 |
g/cm³ |
ASTM D792 |
| Density |
1.50 |
g/cm³ |
ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) |
12 |
g/10 min |
ASTM D1238 |
| Melt Mass-Flow Rate (MFR) |
12 |
g/10 min |
ISO 1133 |
| Molding Shrinkage - Flow (2.00 mm) |
0.80 |
% |
ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) |
0.20 |
% |
ASTM D570 |
| Mechanical |
Nominal Value |
Unit |
Test Method |
| Tensile Strength (Yield, 23°C) |
111 |
MPa |
ASTM D638 |
| Tensile Stress (Break, 23°C) |
120 |
MPa |
ISO 527-2 |
| Tensile Elongation (Break, 23°C) |
3.0 |
% |
ASTM D638 |
| Tensile Strain (Break, 23°C) |
3.6 |
% |
ISO 527-2 |
| Flexural Modulus (23°C) |
5350 |
MPa |
ASTM D790 |
| Flexural Modulus (23°C) |
5200 |
MPa |
ISO 178 |
| Flexural Strength (23°C) |
157 |
MPa |
ASTM D790 |
| Flexural Strength (23°C) |
175 |
MPa |
ISO 178 |
| Impact |
Nominal Value |
Unit |
Test Method |
| Charpy Notched Impact Strength |
7.0 |
kJ/m² |
ISO 179/1eA |
| Notched Izod Impact (3.20 mm) |
69 |
J/m |
ASTM D256 |
| Thermal |
Nominal Value |
Unit |
Test Method |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) |
164 |
°C |
ASTM D648 |
| Melting Temperature |
165 |
°C |
ASTM D3418 |
