杜邦PA6 Minlon 73M30 產品特性：各向異性，含30%礦物填充，熱穩定，低翹曲，可超聲波焊接，抗彎曲
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149
PA6 73M30 物性表：
| Physical |
Dry |
Conditioned |
Unit |
Test Method |
| Density |
1.35 |
-- |
g/cm³ |
ISO 1183 |
| Molding Shrinkage |
|
|
|
ISO 294-4 |
| Across Flow: 2.00 mm |
0.90 |
-- |
% |
|
| Flow: 2.00 mm |
0.90 |
-- |
% |
|
| Water Absorption (Saturation, 23°C) |
6.3 |
-- |
% |
ISO 62 |
| Water Absorption (Equilibrium, 23°C, 50% RH) |
2.1 |
-- |
% |
ISO 62 |
| Mechanical |
Dry |
Conditioned |
Unit |
Test Method |
| Tensile Modulus (23°C) |
4800 |
1700 |
MPa |
ISO 527-2 |
| Tensile Stress (Break, 23°C) |
82.0 |
55.0 |
MPa |
ISO 527-2 |
| Tensile Strain (Break, 23°C) |
15 |
40 |
% |
ISO 527-2 |
| Tensile Creep Modulus (1 hr) |
-- |
1180 |
MPa |
ISO 899-1 |
| Tensile Creep Modulus (1000 hr) |
-- |
740 |
MPa |
ISO 899-1 |
| Flexural Modulus (23°C) |
4800 |
1800 |
MPa |
ISO 178 |
| Impact |
Dry |
Conditioned |
Unit |
Test Method |
| Charpy Notched Impact Strength |
|
|
|
ISO 179/1eA |
| -30°C |
3.5 |
3.5 |
kJ/m² |
|
| 23°C |
5.5 |
11 |
kJ/m² |
|
| Charpy Unnotched Impact Strength |
|
|
|
ISO 179/1eU |
| -30°C |
85 |
85 |
kJ/m² |
|
| 23°C |
110 kJ/m² |
No Break |
|
|
| Notched Izod Impact Strength |
|
|
|
ISO 180/1A |
| -30°C |
4.0 |
-- |
kJ/m² |
|
| 23°C |
5.5 |
9.0 |
kJ/m² |
|
| Thermal |
Dry |
Conditioned |
Unit |
Test Method |
| Heat Deflection Temperature (0.45 MPa, Unannealed) |
196 |
-- |
°C |
ISO 75-2/B |
| Heat Deflection Temperature (1.8 MPa, Unannealed) |
78.0 |
-- |
°C |
ISO 75-2/A |
