杜邦PA6 ZYTEL 73G45L 產品特性：含45%玻纖增強，自潤滑，高光澤，良好的剛性，良好的強度，良好的表面光潔度，用于家電部件，體育用品，高光閃點等應用

我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

PA6 73G45L 物性表：

Physical	Dry	Conditioned	Unit	Test Method
Density	1.51	--	g/cm³	ISO 1183
Molding Shrinkage - Flow				Internal Method
1.60 mm	0.10	--	%
3.20 mm	0.20	--	%
Molding Shrinkage - Across Flow				Internal Method
1.60 mm	1.0	--	%
3.20 mm	0.90	--	%
Molding Shrinkage				ISO 294-4
Across Flow: 2.00 mm	0.90	--	%
Flow: 2.00 mm	0.15	--	%
Water Absorption (Saturation, 23°C)	4.9	--	%	ISO 62
Water Absorption (Equilibrium, 23°C, 50% RH)	1.5	--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	14500	9700	MPa	ISO 527-2
Tensile Strength (23°C)	214	145	MPa	ASTM D638
Tensile Stress (Break, 23°C)	230	160	MPa	ISO 527-2
Tensile Elongation (Break, 23°C)	3.0	5.0	%	ASTM D638
Tensile Strain (Break, 23°C)	3.0	5.0	%	ISO 527-2
Tensile Creep Modulus (1 hr)	--	9400	MPa	ISO 899-1
Tensile Creep Modulus (1000 hr)	--	7300	MPa	ISO 899-1
Flexural Modulus (23°C)	12100	7000	MPa	ASTM D790
Flexural Modulus (23°C)	13000	--	MPa	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	19	23	kJ/m²
23°C	20	25	kJ/m²
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	120	100	kJ/m²
23°C	120	110	kJ/m²
Notched Izod Impact (23°C)	190	240	J/m	ASTM D256
Notched Izod Impact Strength				ISO 180/1A
-30°C	15	--	kJ/m²
23°C	18	24	kJ/m²
Unnotched Izod Impact (23°C)	1500	1500	J/m	ASTM D4812
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	221	--	°C	ASTM D648
Heat Deflection Temperature (0.45 MPa, Unannealed)	221	--	°C	ISO 75-2/B
Deflection Temperature Under Load (1.8 MPa, Unannealed)	213	--	°C	ASTM D648
Heat Deflection Temperature (1.8 MPa, Unannealed)	213	--	°C	ISO 75-2/A
Melting Temperature 2	221	--	°C	ISO 11357-3
CLTE - Flow (23 to 55°C)	0.000016	--	cm/cm/°C	ASTM E831
CLTE - Flow (23 to 55°C)	0.000016	--	cm/cm/°C	ISO 11359-2
CLTE - Transverse (23 to 55°C)	0.00010	--	cm/cm/°C	ASTM E831
CLTE - Transverse (23 to 55°C)	0.00010	--	cm/cm/°C	ISO 11359-2
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (1.50 mm)	HB	--		UL 94